BMW E8X / E9X - RACE front suspension componentsMRT-20004-19
Taxes and Shipping calculated at checkout.
RACE front suspension components for BMW E81 / E82 / E87 / E88 / E90 / E91 / E92 / E93 (including 1M / M3 / Z4)
New kits for E8X / E9X platform now available!
AW-7075 lightweight aluminum control arms, angled end for more suspension travel, provision for headlight level sensor rod (a threaded joint from a rear sensor rod must be used)
AW-7075 lightweight aluminum tension arms, straight design for the best rigidity
AW-7075 lightweight aluminum tie rods, angled end for more suspension travel
Replaceable heavy duty XM-series rod ends
Length adjustable -5mm to +25mm on each arm/rod
3-position adjustability for roll-center and/or anti-dive and/or bump steer
30% weight saving compared to original cast arms
Minimum recommended wheel size 17"
Comes with instructions, mounting hardware and of course MRT Engineering decals
Why do you need one?
BMW E8X / E9X front suspension from the factory is a compromise mainly intended for street use, rubber bushings tend to make the steering feel sloppy. When lowering your car roll-center will suffer, while changing caster or camber settings bump steer geometry might change. With these components you will gain sharp and precise steering feel with full adjustability for your needs.
Does it fit my car?
The components fit most of the E8X / E9X models including 1M / M3 / Z4. See available variations:
- E8X / E9X control arms + tension arms + tie rods
- E8X / E9X control arms only
- E8X / E9X tension arms only
- E8X / E9X tie rods only
Is it easy to install?
No special tools needed, all parts will directly bolt-on. Front end re-alignment required.
If you need any further info please contact us!
How about the lifetime and service of the kit?
The kits have been proved on street and track applications by many of our customers. We're constantly doing R&D to make the kits even better, all improvements are based on customer feedback which is very important to us. We have proven the very same bearings with no maintenance for 20,000 kilometers, through the year, in daily use without signs of excessive wear. When the bearing life comes to an end, they're easily replaceable! Bearings are available around the world from automotive and industrial dealers and any of the spare parts can be also bought separately from us.
We want to keep our customers 100% happy thus we're only using the best materials and manufacturing processes available. All parts are CNC machined: aluminum parts are aerospace grade AW-7075 (black items with hard anodized finish), all fasteners meet European 12.9 quality standard and all spacers/adapters used on the kits are 316L stainless steel.
We use DHL Express shipping for all items. Please find your order tracking information from DHL website.